headstock
英['hedstɒk]
美['hedˌstɒk]
n. (名词)
- 【机】轴承（台）
- 主轴承
- 车头箱
- 车床头
- 竖井的顶架
- 机头座
- 联结架
- 主轴箱
Noun:
-
the stationary support in a machine or power tool that supports and drives a revolving part (as a chuck or the spindle on a lathe)
- 1. Headstock provides two step of feeds.
- 主轴箱提供了两个步骤饲料。
youdao
- 2. Hardened, precision ground gears in headstock.
- 硬化，精密齿轮启闭地面。
youdao
- 3. Headstock is constantly oiled during operation.
- 启闭是在操作过程中不断加油。
youdao
- 4. Clutch in headstock makes the lathe more attractive.
- 在车头离合器使车床更具吸引力。
youdao
- 5. Here you can see the headstock just after I finished boring it.
- 在这里您可以看到启闭刚刚结束后，我无聊了。
youdao
- 6. Hardened, precision ground, chrome molybdenum gears in headstock.
- 硬化，精密研磨，在车头铬钼齿轮。
youdao
- 7. This design mainly aims at the headstock of the CA6140 machine tool.
- 本设计主要针对CA6140机床的主轴箱设计。
youdao
- 8. The focuses of this topic is the system design and the left headstock design.
- 该机床设计的重点是总体设计和部件设计两部分。
youdao
- 9. The headstock body is made of highly resistant thermally stabilized cast iron.
- 工件头架由经过热处理、具有高尺寸稳定性铸铁铸造。
youdao
- 10. The guide way and all gears in the headstock are hardened and precision ground.
- 在车头的所有齿轮经过高频淬火及精密研磨。
youdao
- 11. The focal point of this topic is the system design and the back headstock design.
- 设计的重点是总体设计和后主轴箱设计两部分。
youdao
- 12. It can control degree of the headstock of valve directly through travel indicator.
- 可以通过行程指示表来直观控制阀门开启程度。
youdao
- 13. Here is the temporary apron that carries the headstock along the ways as it is bored.
- 这里是临时停机坪，运载沿，因为它是无聊的方式启闭。
youdao
- 14. Leadscrew, headstock, and tool-post of all with protection system, conform to "CE" Standard.
- 有丝杆、车头、刀架防护装置，符合“CE”要求。
youdao
- 15. The horizontal bed is the foundation member which supports the headstock, tailstock, and carriage.
- 卧式床身是基础构件，用来支承床头箱、尾座和拖板。
youdao
- 16. This let me test a prototype headstock design for a wood turning lathe I'd like to design and build.
- 这让我测试的车床我想设计和建造木材启闭原型设计。
youdao
- 17. Headstock and headstock is the moment to open or close the valve must be imposed by force or torque.
- 启闭力和启闭力矩是指阀门开启或关闭所必须施加的作用力或力矩。
youdao
- 18. This paper presents an approximate solution of instantaneous temperature distribution of the headstock.
- 本文就机床主轴箱的瞬态温度分布提供一个近似解。
youdao
- 19. The pulley is off center 'cause the temp headstock was too big and I had to let it hang off the left side.
- 滑轮是偏离中心'导致气温启闭太大，我不得不让它挂关闭左侧。
youdao
- 20. The compound bearing installed between the headstock and bearing seat does need any lubrication. No wearing.
- 主轴和轴座间安装有自润滑轴承不用加油，没有磨损。
youdao
- 21. Usually sealed to ensure that the number of required headstock that can also be used to indicate the use of time.
- 通常以能保证密封要求的启闭次数来表示，也可以用使用时间来表示。
youdao
- 22. The penstock can be divided into manual type, manual and electric type, electric type according to the headstock.
- 由启闭装置的不同型式可分为手动式、电动式、手电动式三种。
youdao
- 23. The R-network model is used to solve the heat Conduction-temperature problem of the C616-headstock in this paper.
- 本文用电阻网络模型解C616车床床头箱的导热温度场问题。
youdao
- 24. The full text mainly includes combines the milling machine the system design and the headstock designs two parts.
- 全文主要包括组合铣床的总体设计和主轴箱设计两部分。
youdao
- 25. Headstock piece on media flows and forces open or closed to prevent backflow valve media called a non-return valve.
- 启闭件靠介质流动和力量自行开启或关闭，以防止介质倒流的阀门叫止回阀。
youdao
- 26. The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.
- 车床的最大的零件称床身，车头和尾架被紧固在相反末端的床身。
youdao
- 27. The Thermal Properties of Spindle Assembly and Headstock is one of the main elements that influence machining precision.
- 机床主轴部件和主轴箱的热特性是影响机床精度的主要因素之一。
youdao
- 28. A short work may be turned without using the dead center, by simply chucking it properly at the spindle of the headstock.
- 一个短的工作在主轴箱主轴上通过适当简单的卡盘无需使用尾架中心也许就能被转动。
youdao
- 29. A short work may be turned without using the dead center, by simply chucking it properly at the spindle of the headstock.
- 一个短的工作在主轴箱主轴上通过适当简单的卡盘无需使用尾架中心也许就能被转动。
youdao
