18. This article studied dry process of PPS prepreg which is impregnated with slurry method through the use of orthogonal experiment method.
本文采用正交试验设计法,成功地筛选出聚苯硫醚(PPS)泥浆干燥工艺参数。
youdao
19. For requirement of placement ability of trajectory, the reason of prepreg distortion is analyzed and the influence of it is also discussed.
基于轨迹的可铺放性要求分析了铺放过程中预浸料产生畸变的原因及影响轨迹可铺放性的因素。
youdao
20. Was installed at the same time to cut and kit the prepreg, which significantly reduced material waste and helped optimize material throughput.
这在很大程度上减少了原材料的浪费,有助于原材料得到最大限度的利用。
youdao
21. And the increasing of prepreg tack can significantly improve the lateral bending performance, which all agree with theoretical prediction well.
增加预浸料黏附力可显著提高其侧向弯曲性能,符合理论分析结果。
youdao
22. The resin blend has been heated to a temperature substantially greater than 225 degrees Celsius in a curing process when preparing the prepreg.
当制备该半固化片时,所述树脂掺合物在固化程序中经加热至实质上高于摄氏225度的温度。
youdao
23. Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.
微胶囊型固化剂,其制备方法,热固性树脂组合物,预浸渍物及纤维增强的复合材料。
youdao
24. The properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is (installed) on a mechanical test machine.
利用安装在拉伸试验机上的像框剪切装置,研究了平纹预浸碳纤维机织织物的剪切行为。
youdao
25. The results show that the lateral bending performance of prepreg increases with the increasing of temperature, pressure, and decreasing of speed.
结果表明:随着温度增大、压力和速度减小,预浸料的侧向弯曲性能提高;
youdao
26. In this paper the survey of ACG Group is briefly introduced. The low temperature moulding prepreg technology and it's application are emphasized.
本文简介炭集团公司概况,重点介绍低温成型预浸料技术及其应用。
youdao
27. It would be difficult with complex shape to use prepreg mat or RTM process without having resin-starved or resin-rich area, compromising performance.
28. The experiment results show that ultrasonic cutting technique is an effective, clean and controllable method for machining of carbon fibre prepreg. $
实验结果表明,对于纤维预浸料的切割与下料,超声切割技术是一种可获得高质量、高效率的加工方法。
youdao
29. The review shows the technical points of(epoxy) hot-melt prepreg on the(reasonable) combination of resin matrix, matching of curing agents and(accel…
30. Tests were also carried out in composite manufacture, in which the fiber optic refractive sensors were embedded in the prepreg during the cure process.