1. "Devil city" be located in blast tuyere, the four seasons is windy.
“魔鬼城”地处风口，四季多风。
youdao
2. When a reporter drove Tuyere waves, the most sad is not a Journalist.
当记者被推上风口浪尖，最悲哀的不是记者。
youdao
3. The coke of whole hearth radius BF is got by sampling machine of tuyere coke.
利用风口焦炭取样机取得了整个高炉炉缸半径上的焦炭样品。
youdao
4. The argon typically ACTS as a "shroud" gas to provide protection to the tuyere.
氩主要作为覆盖气体对鼓风口提供保护。
youdao
5. Zinc in coagulation in tuyere existed in the state of metal Zn or lead-zinc alloy.
锌在风口凝结物中的存在形式为金属锌或铅锌合金。
youdao
6. The deficient tuyere with chop and change of temperature often causes block dropping.
风口暗淡不活，凉热变化无常，经常出现下大块。
youdao
7. Application: Used as Kiln shed board, slide push board, sagger, Tuyere combined bricks.
用途：工业窑炉用棚板、立柱、槽板、推板、匣钵、卡具、风口组合砖等。
youdao
8. The results showed that melting loss and abrasion were the main cause of tuyere failure.
对紫铜贯流式高炉风口的失效进行了分析，结果表明：熔损和磨损是高炉风口损坏的主要方式。
youdao
9. Only decreasing the areas of major tuyeres will increase the kinetic energy of every tuyere.
只有减小多个风口的面积，才会增大所有风口的鼓风动能。
youdao
10. The paper introduces the procedure for MIG welding of copper helical tuyere of blast furnace.
介绍了高炉紫铜螺旋风口的熔化极氩弧焊工艺。
youdao
11. Tuyere, being an important part of the blast furnace, is often damaged by the bad working condition.
风口是高炉冶炼送风的关键部件，恶劣的工作环境导致其经常破损。
youdao
12. A centrifugal fan is positioned on the top of the box, with outlet tuyere connected with the airflow passage.
箱体的顶部安装有离心风机，其出风口与气流通道相连通。
youdao
13. Speed and the Angle of tuyere of Centrifugal fan are main factors for Combine sieve surface airflow distribution.
离心风机的转速及其出风口角度是影响联合收割机筛面气流场分布的两个主要因素。
youdao
14. Wechat business tuyere has in the past, if you are at the top of tuyere pig, it's time to think about how to save!
微商的风口已经过去，如果你是那头在风口上面的猪，是时候想想如何保命了！
youdao
15. Swirling copper plate tuyere: Swirling copper plate tuyere is mainly applied to metallurgical and chemical industries.
旋流式铜板风口：旋流式铜板风口主要应用在冶金、化工等行业。
youdao
16. At present, large BF iron notch splash is prevented by slurry pressing technology at iron notch and tuyere area in Angang.
目前，鞍钢通过采用铁口及风口区域压浆技术，已基本解决了大型高炉铁口喷溅的问题。
youdao
17. The hearth temperature is reflected by the theoretical combustion temperature at the tuyere and the temperature of the liquid iron.
炉缸温度主要由风口理论燃烧温度与铁水温度反映出来。
youdao
18. The main functions are coal injection monitoring, abnormal BF operation monitoring, diagnosing coke movement and tuyere temperature etc.
其主要功能包括监测风口喷煤状态，反映风口内焦炭运动，监视异常炉况，反映风口温度高低。
youdao
19. The deterioration mechanism of the tuyere coke and the relationship between the tuyere coke property and the BF operation were discussed.
探讨了风口焦炭劣化机理，风口焦炭性状与高炉操作的关系。
youdao
20. A type of adjustable tuyere, which applied on the cupola, makes smelting operation more conveniency and rapid, smelting effect more elevated.
研制出一种可调风口，应用在双屑化铁炉和冲天炉上，能使熔炼操作方便快捷，提高熔炼效果。
youdao
21. The hot air is always carried to the furnace by a powerful turboblower, through the hot blast main, bustle pipe, bootleg, blowpipe and tuyere.
热风由功率强大的鼓风机通过热风总管、环形风管、风口小弯管、直吹管和风口不断鼓人高炉。
youdao
22. The problems and the solution of blast furnace tuyere in the casting are introduced. Measurements on lowering gasser and needle hole is analysed.
介绍了高炉风口在铸造中遇到的问题和解决方法，讨论了降低气孔、针孔的工艺措施。
youdao
23. It is concluded that cross jet can achieve a good condition of heat and mass transfer for the combustion of pulverized coal in front of a tuyere.
这表明交叉射流为煤粉在风口前的燃烧提供了良好的传热和传质条件。
youdao
24. The blast furnace raceway formation under the intensive coal injection by measurement of micro wave reflection gunned through a tuyere is discussed.
通过利用风口测量枪进行的微波反射测量方法讨论了大煤粉喷吹量条件下高炉风口回旋区的形成。
youdao
25. The slag forming process occurs in stage of primary slag, bosh slag, tuyere slag and tapped slag, among which the most important stage is the bosh slag.
高炉造渣过程经历初渣、炉腹渣、风口渣和终渣等几个阶段，其中对高炉强化最重要的阶段是炉腹渣。
youdao
26. On the basis of the characteristics of BF Pulverized coal combustion, the combustion of pulverized coal in the blowpipe and tuyere is simulated step by step.
根据高炉喷吹煤粉燃烧特点 ，对直吹管和风口回旋区分段模拟 ，以直吹管模拟结果作为回旋区输入 。
youdao
27. The smelting process was strengthened by using high top pressure, high pressure drop, large blowing rate, reduced tuyere section and enhanced blasting velocity.
采取高顶压、高压差、大风量、缩小风口直径、提高风速和鼓风动能等措施进一步强化冶炼；
youdao
28. The smelting process was strengthened by using high top pressure, high pressure drop, large blowing rate, reduced tuyere section and enhanced blasting velocity.
